Qness 150 CS ECO Semiautomatic Rockwell Tester

The Q10 CHD Master is a fully automatic micro hardness tester for performing Vickers micro hardness testing on 1 mounted or unmounted sample at a time. The Q10 CHD Master is a special machine and software configuration meant to provide an entry into automatic micro hardness testing. Users can perform multiple traverses on a single sample, but you are limited to 1 sample at a time on the stage. There is also no overview camera system available on this model.

An ultra-precise load cell controls the test force for reliable micro hardness testing results between 50 grams and 10 kg.

The Q150R semiautomatic Rockwell hardness tester has a load range of 1 - 250 kg and can be used for performing hardness test in accordance with ASTM E-18 or DIN EN ISO 6508.

A large flat anvil system and computer system provide for a unique and enhanced working environment.

Test methods: HRA-HRV, HR15-N/T/W/X/Y, HR30-N/T/W/X/Y, HR45-N/T/W/X/Y (also HVB and HVT, not according to standards).

Integrated conversions according to ASTM E140, DIN EN ISO 18265, DIN EN ISO 50150.

The Q150A is a fully automatic Rockwell hardness tester, capable of processing multiple samples in one run. A generous X/Y stage coupled with a full computer system allows for the increase in productivity. Additionally, the unit has two optical ports that can be equipped with 2 objectives. If an overview camera is desired, see the Q150A+ model.

The Q150A has a load range of 1 - 250 kg and can be used for performing hardness test in accordance with ASTM E-18 or DIN EN ISO 6508.

The Q150A+ is a fully automatic Rockwell hardness tester, capable of processing multiple samples in one run. A generous X/Y stage coupled with a full computer system allows for the increase in productivity. Additionally, the unit has two optical ports that are equipped with an overview camera and 1 objective.

The Q150A+ has a load range of 1 - 250 kg and can be used for performing hardness test in accordance with ASTM E-18 or DIN EN ISO 6508.

The new Brinell / Knoop / Rockwell / Vickers hardness tester series EVO by QATM combines extremely short cycle times with maximum precision. The characteristic "C" shaped machine frame gives the CS and C versions of the Qness 250/750/3000 EVO series their name. Features include an 8-position tool changer for fast test method change-over, a swiveling downholder for hard-to-reach test positions, a tool-free indenter changing system, and a wide range of test tables and prism anvils.

The proven concept with fixed test head and up/down moving spindle has been standard in hardness testing for many decades and is ideally suited for small test pieces - as model "C" for component heights up to a maximum of 395 mm and as an even more compact model "CS" with 175 mm maximum test height.

Integrated conversions: DIN EN ISO 18265, DIN EN ISO 50150