Qmount UV Mounting Device
The Qmount is a modern device for the light-curing-based mounting of materialographic samples.
The samples are placed in the device which is equipped with customized, powerful LED technology. The UV transparent mounting moulds are filled with the UV curing resin. The transparent sample can be removed within a very short time frame. A suction unit from the QATM portfolio can be connected to the device to increase work safety.
Learn More About QATM's Beginnings as ATM (2 min 30 sec)
Here is a short tour of QATM's metallographic sample preparation capabilities.
- UV mounting in the shortest possible time (60 seconds)
- Highly efficient, long-life LED technology
- Robust machine design
- Connectable suction unit (optional)
High Sample Capacity
The device contains a scratch-resistant glass plate (200 x 260 mm) which enables the simultaneous curing of up to 12 samples with a diameter of 40 mm. The work area is easy to clean due to the simple design.
Due to the very short process times, the Qmount opens up the possibility of producing transparent, materialographic standard mountings of various materials very quickly and cost-effectively.
The process parameters are clearly shown on a color display and can be continuously adjusted using a rotary knob. The mounting process is started, paused or ended using the QATM start-stop button. An acoustic signal informs the user at the end of the process.
Max. sample support surface
200 x 260 mm
Max. sample height
Adjustable curing time
0 - 100 min
(depending on application)
70 - 90 °C
100 - 240 V 50/60 Hz (1Ph/N/PE)
15 x 7 x 18"
32 lbs (approx.)