Qcut 500 A (Brillant 275) Automatic Cut Off Saw 20in
The Qcut 500 A (Brillant 275) Cut Off Saw combines the best design characteristics of QATM cut off machines with precision control, two-axis cutting movement. A 17" cut off wheel and a 20 HP motor provide the ability to cut a 6" round cross section.
Only the Qcut (Brillant) series offers cutting modes such as step, pulse, saw, orbital and wave that reduce the contact area of the cutting wheel for cutting very hard or large parts. The Qcut 500 A is ideal for large part or high volume sectioning.
Qcut 500 A (BR275) Detailed Overview (15:26)
Relax and watch Scott Nelson go over all the amazing features of the Qcut 500 A (BR275) cut off saw.
See the auto Z-axis cross feed in action!
Cross Vise (37 sec)
View the Cross Vise by QATM GmbH, for use in metallographic cut off saws. Presented by Mager Scientific.
Vertical Clamp With Bar Supports (26 sec)
Supports are available to help keep bar stock in position during the cut.
Easy Clamping System (1 min 27 sec)
Watch this QATM-produced video to see how easy it is to configure the Easy Clamping System to meet your clamping needs.
Fast Lock Vises (46 sec)
See the basic, yet highly functional Fast Lock Vises for cut off saws.
X-Clamp (1 min 6 sec)
The X-Clamp is an excellent vise when clamping irregular parts within the cut off saw.
Vertical Clamp With Height Extenders (47 sec)
Easily adjust the height of your standard vertical clamp with QATM GmbH's Easy Base and Height Extenders.
Small Bar Stock Clamp (37 sec)
Rotatable clamp designed for small diameter bar stock.
Vertical Spanner Clamp (1 min 5 sec)
The vertical spanner clamp is a must-have if you are sectioning rings or other specimens that have a ring shape.
Solid welded aluminum plate construction houses a powerful motor that is mounted outside the cutting chamber.
The large, stainless steel T-slot table will accommodate a wide variety of clamps including the best quick clamping vise on the market.
All abrasive cut off saws manufactured by QATM are designed to give you the ultimate in precision.
The optional laser alignment tool aids in the precision of the section.
Operators of all strengths can replace the cut off wheel with the Easy Nut system.
Bright LED lights illuminate the cutting chamber.
Heavy Duty Construction
All abrasive cut off saws manufactured by QATM are made with the highest quality components.
The exterior bodies are made of thick, powder coated aluminum.
Cutting tables are made of stainless steel, as are the unique sliding hood doors.
With normal maintenance and care, QATM's abrasive cut off saws are built to last and will prove to be a worthy investment for any company.
Safety is Top of Mind
All metallographic wet abrasive cut off saws manufactured by QATM are closed systems with safety glass.
All models will not begin operation until the doors are closed. The doors cannot be reopened until the blade stops rotating.
All models have an emergency stop button.
Max Cut Capacity:
190 mm / 7.48" Diameter
Max Wheel Size:
508 mm / 20" diameter
32 mm / 1¼"
40 mm Optional
With Z: 550 x 500 mm / 21.6 x 20"
Without Z: 700 x 500 mm / 26.7 x 20"
Front to Back Table Movement (X-axis):
420 mm / 16.5" Travel
Vertical Wheel Movement (Y-axis):
280 mm / 11"
Left to Right Table Movement (Z-axis):
200 mm / 8"
Automatic Cutting Wheel Measurement Tool (option):
Automatic Central Greasing:
Laser Alignment (option):
Variable 1000-2800 rpm
480 V / 60 Hz, 3 Phase
W x H x D:
53 x 73 x 49"
200 L / 53 Gallons