Opal 480 Mounting Press 50-70mm

The Opal 480 is a sturdy and powerful metallographic mounting press with easily interchangeable cylinder sets and full process programmability. Only the Opal 480 has the ability to make mounts up to 70 mm in diameter or rectangular mounts. A robust 4 HP motor provides the necessary power to make large mounts.

Intermediate ram allows for dual mounting. When combined with Mager's complete line of mounting resins, the Opal 480 can produce the largest mounts available with excellent results.

  • Videos
  • Features
  • Specs
  • QATM OP480 Mounting Press (1 min 37 sec)

    Get to know the Opal 480 Mounting Press. Make mounts up to 70 mm in diameter or rectangular mounts!

  • Innovation

    • Unique Cylinder design prevents seizure by allowing out-gassing during resin melt
    • EasyGlide sliding closure works with the mold cylinder for automatic operation, eliminating cross threading or binding common with other designs




  • Specifications

    Mold sizes:

    50 mm (2") Round
    60 mm (2.4") Round
    70 mm (2.75") Round
    30 x 60 mm Rectangular
    40 x 60 mm Rectangular

    Thermostat range:

    20 - 200°C
    0 - 390°F

    Pressure range:

    0 - 300 bar

    Heating power:

    4 x 630 Watt

    Heating time:

    1 - 30 Minutes

    Cooling time:

    1 - 30 Minutes

    WxHxD:

    16 x 18 x 20"

    Weight:

    150 lbs

    Power:

    110V 60 Hz, 1 Phase
    or
    220V 60 Hz 1 Phase

You recently viewed

Clear recently viewed