Brillant 255 Manual Cut Off Saw 14-16in
The Brillant 255 Cut Off Saw, with a spacious LED illuminated cutting chamber and left and right side openings, is an excellent manual option for sectioning long continuous objects.
The Brillant 255, built from solid welded aluminum plates and powered by a 10 HP motor mounted outside the cutting chamber, is made to handle demanding daily use. The manual, vertical wheel movement combined with manual, horizontal table feed, provides accurate, low deformation cutting.
BR255 Overview (2 min 43 sec)
Meet the Brillant BR255 floor model manual metallographic cut off saw. Perfect for cutting large parts and where manual cuts are preferred.
Easy Clamping System (1 min 27 sec)
Watch this QATM-produced video to see how easy it is to configure the Easy Clamping System to meet your clamping needs.
Fast Lock Vises (46 sec)
See the basic, yet highly functional Fast Lock Vises for cut off saws.
X-Clamp (1 min 6 sec)
The X-Clamp is an excellent vise when clamping irregular parts within the cut off saw.
Vertical Clamp With Height Extenders (47 sec)
Easily adjust the height of your standard vertical clamp with QATM GmbH's Easy Base and Height Extenders.
Small Bar Stock Clamp (37 sec)
Rotatable clamp designed for small diameter bar stock.
Vertical Spanner Clamp (1 min 5 sec)
The vertical spanner clamp is a must-have if you are sectioning rings or other specimens that have a ring shape.
A variety of clamping options for the large, stainless steel table allows for handling of unique samples.
LED illumination bathes the cutting chamber in a cool white light and is neatly incorporated in the design of the chamber to allow for unencumbered operation.
All abrasive cut off saws manufactured by QATM are designed to give you the ultimate in precision.
The optional laser alignment tool aids in the precision of the section.
Operators of all strengths can replace the cut off wheel with the Easy Nut system.
Bright LED lights illuminate the cutting chamber.
Heavy Duty Construction
All abrasive cut off saws manufactured by QATM are made with the highest quality components.
The exterior bodies are made of thick, powder coated aluminum.
Cutting tables are made of stainless steel, as are the unique sliding hood doors.
With normal maintenance and care, QATM's abrasive cut off saws are built to last and will prove to be a worthy investment for any company.
Safety is Top of Mind
All metallographic wet abrasive cut off saws manufactured by QATM are closed systems with safety glass.
All models will not begin operation until the doors are closed. The doors cannot be reopened until the blade stops rotating.
All models have an emergency stop button.
Max Cut Capacity:
150 mm / 5.9" Diameter
Max Wheel Size:
400 mm / 16" diameter
32 mm / 1¼"
With Z: 420 x 375 mm / 16.5 x 14.5"
Without Z: 550 x 375 mm / 21.5 x 14.5"
Front to Back Table Movement (X-axis):
365 mm / 14.3" Travel
Vertical Wheel Movement (Y-axis):
170 mm / 6.7"
Left to Right Table Movement (Z-axis):
150 mm / 5.9"
Laser Alignment (option):
Fixed: 1950 rpm
220 V / 60 Hz, 3 Phase
480 V / 60 Hz, 3 Phase
W x H x D:
44 x 63 x 37"
130 L / 34 Gallons