Brillant 250.3 Automatic Cut Off Saw 14in

The Brillant 250.3 is our largest tabletop abrasive cut off saw with a maximum 14" abrasive cut off wheel. This is an automatic precision wet abrasive cut off saw that work on the production floor or the metallurgical laboratory. Highly programmable with many features to help you automate your process.

  • Videos
  • Features
  • Specs
  • BR250.3 Cut Off Saw Overview (5 min)

    Take a look at the up to date features of the ATM Brillant BR250.3 metallographic cut off saw.

    Easy Clamping System (1 min 27 sec)

    Watch this ATM-produced video to see how easy it is to configure the Easy Clamping System to meet your clamping needs.

    Fast Lock Vises (46 sec)

    See the basic, yet highly functional Fast Lock Vises for cut off saws.

    X-Clamp (1 min 6 sec)

    The X-Clamp is an excellent vise when clamping irregular parts within the cut off saw.

    Vertical Clamp With Height Extenders (47 sec)

    Easily adjust the height of your standard vertical clamp with ATM GmbH's Easy Base and Height Extenders.

    Small Bar Stock Clamp (37 sec)

    Rotatable clamp designed for small diameter bar stock.

    Vertical Spanner Clamp (1 min 5 sec)

    The vertical spanner clamp is a must-have if you are sectioning rings or other specimens that have a ring shape.

  • Programmability, Repeatability, and Automation

    The programmability and automation of the abrasive cut off saw line really sets ATM apart from the field. Programming is easy and intuitive using the color touch screen control panel. Repeatable results are acheived through programs that are saved and can be password protected.

    With the Brillant 250.3 wet abrasive cut off saw you can move beyond simple serial cutting and into multi-part positioning (MPP), where you affix multiple parts on the table and program multiple cuts for a long automated cutting session.

    Fully Automatic Cutting

    Our abrasive cut off saw is highly programmable allowing you to perform precision, complex cutting sequences for automated sectioning in the metallographic laboratory or on the production floor.

    Reduce your re-clamping time by performing multiple cuts on a single part, or multiple cuts on multiple parts in one cutting session. Each cut can be programmed differently than the other. With 5.5" of crossfeed travel, and 10" of front/back travel, you get a large working area.

    To process large batch runs, just clamp multiple parts within the working area and create a program. To maximize throughput we recommend a custom clamping solution, which we can assist with, or create your own utilizing the 12mm standard T-slot table.

    Precision

    All abrasive cut off saws manufactured by ATM are designed to give you the ultimate in precision.

    On the Brillant 250.3, you can slow the table/wheel feed rate down to 0.1 mm/sec, or crank it up to the maximum 40 mm/sec.

    The crossfeed table travel offers precision to 0.1 mm, controlled either electronically by the joystick or manually by a wheel on the front of the machine.

    The optional laser alignment tool aids in the precision of the section.

    Operators of all strengths can replace the cut off wheel with the Easy Nut system.

    Bright LED lights illuminate the cutting chamber.

    Automatic Cutting Modes

    With motorized X, Y and Z axes you have a full array of cutting modes to choose from.

    Heavy Duty Construction

    All abrasive cut off saws manufactured by ATM are made with the highest quality components.

    The exterior bodies are made of thick, powder coated aluminum.

    Cutting tables are made of stainless steel, as are the unique sliding hood doors.

    With normal maintenance and care, ATM's abrasive cut off saws are built to last and will prove to be a worthy investment for any company.

    Safety is Top of Mind

    All metallographic wet abrasive cut off saws manufactured by ATM are closed systems with safety glass.

    All models will not begin operation until the doors are closed. The doors cannot be reopened until the blade stops rotating.

    All models have an emergency stop button.

  • Specifications

    Max Cut Capacity:

    4.3" (110 mm) with 12" wheel
    or
    5.31" (135 mm) with 14" wheel

    Max Wheel Size:

    14" (350 mm) diameter

    Arbor Size:

    32 mm / 1¼"

    Table Size:

    With Z: 15.74 x 12" (400 x 300 mm)
    or
    Without Z: 19.68 x 12" (500 x 300 mm)

    T-slot Size:

    12 mm

    Front to Back Table Movement (X-axis):

    10.23" (260 mm)

    Vertical Wheel Movement (Y-axis):

    7.08" (180 mm)

    Left to Right Table Movement (Z-axis):

    5.51" (140 mm)

    Pulse Cutting:

    Yes, user controls the distance forward and back

    Automatic Feed Speed Range:

    0.1 - 40 mm/sec

    Laser Alignment (option):

    Yes

    Motor:

    9.5 kVA

    Motor Speed:

    Variable: 800 - 3400 rpm

    Power:

    220 V / 60 Hz, 3 Phase
    480 V / 60 Hz, 3 Phase

    W x H x D:

    40 x 30 x 32"

    Weight:

    441 lbs

    Recirc System:

    45 L / 12 Gallons

You recently viewed

Clear recently viewed